Grip Factory Munich GF-9 - Manual (Page 11)

GF-9 Crane System Instruction Manual
Page: 10
6.
Now connect the adjustable rigging rod support between the vertical connection on
the second lower rigging rod and the rigging rod connector between the second and
third upper rigging rod, securing with the attached safety pins. Now the adjustable
rigging rod support can also be adjusted to ensure that the rods are straight. The
adjustable rigging rod support provides extra support to the rigging and is used in
versions 9 & 10.
Rigging rod connector Adjusting the turnbuckle! Adjustable rigging rod support
Parallelogram supports:
1. From version 3 onwards it is recommended to use the parallelogram supports. To see
the correct positioning, please refer to the drawing of the individual version. The
supports are bolted to both sides of the respective extension and connected to the
parallelogram with the locking pin from above as shown below.
Connecting the parallelogram support
Setting the adjustable rigging rod
support
Connecting the safety pin