Greenheck Waterwash (458292) - Manual (Page 17)

17 April 2005
®
END SKIRT INSTALLATION INSTRUCTIONS
1. After the hood is hung in position, slide the hemmed form on top of the end skirt onto the end panels of the
hood.
2. Drill a hole in the hood end panel to line up with the hole in the end skirt. Attach the end skirt with a 1/4 in.
bolt and cap nut to the inside of the hood, or tack weld the end skirt to the hood.
3. Position the end skirt against the wall and attach. The method depends on the wall construction. (fasteners
for this are not provided)
4. Caulk the internal joint formed by the end skirt and the hood end panel with NSF approved silicone caulk
(GE SCS-1009 or its equivalent). The caulk is not provided.
5. To allow for ease in cleaning, also caulk all the external seams.
Return to Page 9.
Fig. 18