Greenheck Melink IH3 Operations - Manual (Page 9)

VI. Touchpad Main Menu
Display Menu
The Display Menu will allow the Kitchen Staff Person or Maintenance Technician to view basic
system status items such as Faults, VFD Speeds, and Hood Sensor status in a list format. The Display
Menu is accessible to any user.
System Configuration Menu
The System Configuration Menu is a mean by which one can change the setup of the Intelli‐
Hood system for the particular kitchen installation. The number of hoods, fans, and many parameters
can be configured through the System Configuration Menu. The Intelli‐Hood Technical Menu contains
detailed information about the System Configuration Menu.
When one selects System Configuration Menu from the Main Menu, the screen will prompt the
user to input a pass code to proceed. This pass code is intended to prevent the accidental access of the
System Configuration Menu. One should not attempt to modify the System Configuration Menu
parameters without a thorough knowledge of Intelli‐Hood programming. Refer to the Intelli‐Hood
Technical Manual or contact Melink Corporation or your Intelli‐Hood Regional Distributor for more
assistance.
Help Menu
The Help Menu contains instructions for contacting Technical Support and other information.
VII. Aux Touchpad
The Aux Touchpad (AT) is a secondary user interface point of the Intelli‐Hood system. The Aux
Touchpad is intended to be used in large installations with hoods and fans where there is desire to
operate some fans without operating other fans. Aux Touchpads provide additional on/off user
interface points to the Intelli‐Hood system. Up to 10 Aux Touchpads can be installed on an Intelli‐Hood.
The Aux Touchpad can not show status or speeds of the fans. The Aux Touchpad can indicate a
fault, but it can not indicate the fault type. The Intelli‐Hood Configuration parameters can not be
adjusted with a Aux Touchpad. Therefore, the Aux Touchpad should never be used as the only user
Interface Device of an Intelli‐Hood installation.