Packaging, Connecting the gxw410x – Grandstream GXW410x User Manual User Manual
Page 6

Grandstream Networks, Inc.
GXW410x User Manual
Page 6 of 32
Firmware Version 1.4.1.5 Last Updated: 5/2014
PACKAGING
Unpack and check all accessories. Equipment included in the package:
1) One GXW410x Unit
2) One universal power adaptor
3) One Ethernet cable
CONNECTING THE GXW410X
TABLE 1: DEFINITIONS OF THE GXW CONNECTORS
LAN
(
OR
PC)
C
ONNECT YOUR
PC
TO THIS PORT
.
I
T WILL THEN BE ASSIGNED AN
IP
ADDRESS FROM YOUR
R
OUTER
/DHCP
S
ERVER
.
T
HE
GXW410
X ACTS AS A SWITCH ONLY
.
WAN
C
ONNECT TO THE INTERNAL
LAN
NETWORK OR
P
UBLIC
I
NTERNET
.
VIDEO
IN
Connection for Analog based Video Surveillance Camera (RCA)
A
VAILABLE IN
HW
REVISION
1
O
NLY
RESET
Factory Reset button. Press for 7 seconds to reset factory default settings.
POWER SUPPLY
Power adapter connection
OFF/ON
Off/On switch
FXO1 - FXO8
FXO ports to be connected to physical PSTN lines from a traditional PSTN PBX or
PSTN Central Office.
NOTE: GXW410x acts as bridge only, if a device is connected to the LAN port, this device will get an ip
in same subnet as the WAN IP (NAT is disabled).
LAN/WAN
RJ-45
Ethernet Ports
VIDEO IN Jack
FXO Ports
Power Supply
On/Off Switch
GXW410x
FIGURE 1: DIAGRAM OF GXW410X BACK PANEL