Grandstream GXV3601 Series IP Camera User Manual - Manual (Page 48)

‘Grandstream Networks, Inc. GXV3601_HD User Manual Page 48 of 59
Firmware Version 1.0.4.43 Last Updated: 08/2013
• Enable Motion Detection:
When checked, Motion Detection enabled.
• Show Motion Detection Regions: When checked, Motion Detection region with number will be
displayed in White Rectangle in the screen; when “Edit” clicked,
the Rectangle will become Red , as shown in Figure 16-1.
• Select a Region:
Pull down to select and configure alarm region, altogether 16
alarm region available, from 0 to 15.
•
Sensitivity: Select configured alarm region number, input number for
sensitivity to trigger alarm, 100 is the maximum sensible value.
Alarm Action:
• Record Video From…..:
Allow user to configure how long pre/post alarm trigger moment,
the video to be captured by the camera.
• Voice Alarm to SIP Phone:
When checked and SIP proxy configured and IPCam registered,
SIP alarm call will be made to pre-configured number.
• Upload to Alarm Center:
When checked, the alarm video will be transferred to Alarm
Center, like Grandstream free GSurf _Pro VMS software.
• Upload to Alarm HTTP Server:
When checked, the alarm will be sent to Alarm HTT Server.
Third
Party Server also can be used via GS HTTP API
• Record Video and Upload…:
When checked and FTP server configured, the recorded video will
be FTPed to the configured FTP server.
• Email and FTP upload JPEG:
When checked, snapshots of trigger moment will be generated
and be emailed to pre-configured email account, also upload to
FTP server if configured.
NOTE:
 Grandstream free GSurf_Pro VMS software can be downloaded here:
http://www.grandstream.com/products/tools/surveillance/gsurf_pro.zip
Motion Detection Time Schedule:
This page allows user to configure Motion Detection Operation Schedule:
Figure 17-2: Motion Detection Schedule Configuration Page
•
As shown in Figure 15-2, user can configure the Motion Detection Region with related Start and
Stop time to control the motion detection operation.