Grandstream GXV3601 Series IP Camera User Manual - Manual (Page 45)

Grandstream Networks, Inc. GXV3601_HD User Manual Page 45 of 59
Firmware Version 1.0.4.43 Last Updated: 08/2013
DI Alarm Action:
This tab configure how the GXV3601_HD takes action when 3
rd
party DI/DO triggered:
• Record Video:
Record video based on configured Pre/Pro Alarm intervals to VMS,
server or internal SD card if plugged.
• Voice Alarm to
SIP Phone: Alarm SIP phone call to configured Grandstream Video/Audio phones in
the Phone List page using the configured SIP account when an alarm is triggered.
• Alarm Output:
If checked the alarm will output via the configured method or equipment
when alarm is triggered.
• Upload to Alarm Center: Integrated with GSurf_Pro. If checked the GXV3601_HD will report
the alarm event to GSurf_Pro
• Upload to Alarm HTTP Server:
• Record Video and Upload to FTP Server:
• Email and FTP uploaded JPEG
and Store it to USB card or SD driver
Voice Alarm to SIP Phone – If this option is selected, the GXV3601_HD will make calls to the
number listed in the Phone List page using the configured SIP account when an alarm is
triggered. To use this function, the settings in SIP page must be configured properly. Alarm
Output – If this option is selected, the alarm will output via the configured method/equipment
when it is triggered.
Upload to Alarm Center – This option is an integrated feature with GSurf_Pro. If this option is
checked, the GXV3601_HD will report the alarm event to GSurf_Pro.
Record Video and Upload to FTP server – If this option is selected, the GXV3601_HD will
record the video and upload it to the FTP server when an alarm is triggered. You must check
Record Video and configure the FTP page properly to use this feature.
Email JPEG and Store it to USB drive or SD card – If this option is selected, the
GXV3601_HD will capture the image and store it to connected live storage device when an
alarm is triggered.