Grandstream GXV3601 Series IP Camera User Manual - Manual (Page 35)

Grandstream Networks, Inc. GXV3601_HD User Manual Page 35 of 59
Firmware Version 1.0.4.43 Last Updated: 08/2013
Maintenance Page
This page allows user to maintain the camera:
Figure 11: Maintenance Page
• Restart:
When clicked, the camera will reboot or restart
• Restore:
When clicked, the camera will be reset to factory default, wiping
out all the configurations (except IP address)
Firmware Upgrade and Provisioning:
• Upgrade via:
Upgrade firmware via TFTP, HTTP or HTTPS
• Firmware Server Path:
Server path holding the firmware
• Config Server Path:
Server path holding the configuration file (auto provisioning)
• XML ConfigFile Password: Password for encrypt the XML based configuration file
• Automatic Upgrade Interval (Minutes):
Time interval for automatic upgrade, default 10080
• Automatic Upgrade:
Checked to enable automatic firmware upgrade and provisioning.
NOTE:
 Only XML based automatic provisioning is supported by GXV3601_HD.