Grandstream GXV3601 Series IP Camera User Manual User Manual
Page 16
Grandstream Networks, Inc.
GXV3601_HD User Manual
Page 16 of 59
Firmware Version 1.0.4.43
Last Updated: 08/2013
Connect to the Camera using Static IP
If no DHCP server in the network, or the camera does not get IP from DHCP server, user can
connect the camera to a computer directly, using static IP to configure the camera.
The default IP, if no DHCP server; or DHCP offer time out (3 minutes), is 192.168.1.168
1. Connect the computer RJ-45 via an Ethernet cable directly to the IP camera GXV3601_HD.
2. Configure the computer using Static IP: 192.168.1.XXX (1 configure the “Subnet mask” to “255.255.255.0”. Leave the “Default Gateway” to “Blank” like 3. Power on the GXV3601_HD. 4. Start the browser when the network connection is up. 5. Enter 192.168.1.168 in the address bar of the browser. 6. The browser will ask for plug-in or ActiveX if not installed, otherwise it will get to Home page and start to show the video captured by the camera (by default the camera enabled anonymous
below:
access)