Grandstream GXV3601 Series IP Camera User Manual - Manual (Page 39)

Grandstream Networks, Inc. GXV3601_HD User Manual Page 39 of 59
Firmware Version 1.0.4.43 Last Updated: 08/2013
PTZ Control Settings Page
This page configures the PTZ settings.
1 . Select the PTZ protocol that the connected device supporting from the pull-down list
(Pelco-D/C)
2. Next, select the corr ect Baud Rate from the drop down menu to match the connected
device.
3. If multiple devices used, please select right address ID based on the 3 rd party device user
manual (the PIN switch address) here.
Figure 14: PTZ Setting Page