Grandstream GXV3601 Series IP Camera User Manual - Manual (Page 40)

Grandstream Networks, Inc. GXV3601_HD User Manual Page 40 of 59
Firmware Version 1.0.4.43 Last Updated: 08/2013
Connect a PTZ device to the GXV3601_HD
1. Connect the 3 rd party PTZ device to GXV3601_ H D by following the connection
diagram shown below
2. In Advanced Settings, s e l e c t PTZ tab, configure the PTZ Protocol and
Baudrate according to the connected PTZ device (refer to previous page)
3. Click Save and reboot the device to apply all changes.
4. Use those PTZ buttons on the WebGUI homepage to tilt, pan the GXV3601_HD, also
adjust the speed.
NOTE:
 GXV3601_HD itself does NOT support PTZ. The supported device must be connected to the
RS485 pins to Pan, Tilt.
 The FOCUS and Zoom function may not work if 3 rd party device not supported
 Press and hold the corresponding control button to adjust the Pan, Tile and Speed.