Grandstream DP715 User Manual User Manual
Page 42
Firmware version 1.0.0.33
DP715/DP710 User Manual
Page 40 of 56
In addition to the Basic Settings configuration page, end users also have access to the Device Status page.
Table 12:STATUS PAGE
MAC Address
The device ID, in HEX format. This is very important ID for ISP troubleshooting. The Mac
address will appear in this place. The MAC address will be used for provisioning and can
be found on the label coming with original box and on the label located on the bottom
panel of the device.
RFPI Address
Radio Fixed Part Identity; indicate the unique identification number of the DP715 base
station.
IP Address
This field shows the IP address of the DP715.
Product Model
This field contains the product model info (“DP715”).
Hardware Version
This field shows the hardware revision of the unit and the part number.
Software Version
Program: This is the main software release. This number is always used for firmware
upgrade. Current release is 1.0.0.33 Boot and Loader are seldom changed.
Bootloader:current version is 1.0.0.1.
Core: current version 1.0.0.5
Base: current version is 1.0.0.19
Software Status
Running Mem: 3980, indicate if the software is running and display the memory usage.
System Up Time
Shows system up time since the last reboot.
PPPoE Link Status
Indicates whether the PPPoE connection is up if the DP715 is connected to DSL modem.
NAT
This filed indicates the type of NAT connection used by the DP715.
Base Status
Displays relevant information regarding the Handset subscription status.
Handset
Subscribe
IPUI
TPUI
Handset 1
Yes
015a0178e4
000001
• Handset 1 is subscribed with the DP715 base station.
• IPUI (“International Portable User Identity “): is the identifier of each Handset registered
to the base.
• TPUI (“Temporary Portable User Identity”): Allocated to the Handset automatically by
the DP715 base.
Handset Status
Displays relevant information regarding the Handset status.
Handset
Hook
SIP
Registration
DND
Forward
Busy
Forward
Delayed
Forward
Handset 1
On Hook
Registered
Yes
613
• Handset 1 is registered with SIP Server.
• Handset 1 user has set Do Not Disturb.
• Handset 1 user has set his calls to be unconditionally forwarded to ext 613.
• Handset 1 user has not set Busy or Delay call Forward.