Grandstream GXP21xx XML Application Guide - Manual (Page 7)

FIRMWARE VERSION 1.0.4.23 GXP21xx XML APPLICATION GUIDE Page 7 of 36
XML APPLICATION CONFIGURATION
FIRMWARE
Before the XML application is launched on GXP21xx, the firmware on the phone must be upgraded to
version 1.0.3.30/1.0.4.x. This document describes functions and features based on firmware version
1.0.4.23. Please refer to the following link for firmware upgrading information:
http://www.grandstream.com/support/firmware
WEB GUI CONFIGURATION
To launch the XML application on GXP21xx, firstly set the XML application server path and softkey label in
web GUI->Settings->Advanced Settings page.
The Server Path must be set to the web server directory where the application is located. Currently HTTP
and HTTPS are supported. The accepted format are as below (content in [ ] is optional).
• For HTTP
IP_address[:port]/dir/filename or http://IP_address[:port]/dir/filename
Hostname[:port]/dir/filename or http://Hostname[:port]/dir/filename
• For HTTPS
https://IP_address[:port]/dir/filename
https://Hostname[:port]/dir/filename
https://username:password@IP_address[:port]/dir/filename
https://username:password@Hostname[:port]/dir/filename