Genee World GV-6100 - Manual (Page 11)

This function is to snap and display images with the USB interface, which includes displaying
static and dynamic pictures, snapping dynamic images and playback the dynamic images with
the Windows Media Player or its own player.
1. Insert the CD-ROM that comes with your visualiser into the CD-ROM drive. If Autorun is
enabled on your system, then the Software Setup window will be displayed automatically as
below.
If it does not start automatically, after inserting the CD-ROM, Click [Start] -> [My Computer],
and double click (the CD-ROM drive letter might be different among different computer
systems), then the above screen will appear immediately.
2. Click the Install Code-Writing Program button to install Code-Writing Program.
3. Click the Install DirectX9.0 button to install Microsoft DirectX 9.0.
4. Click the Install Capture Program button to install the program that captures images in the
AVI or Bitmap format.
5. Click the Install USB Driver button to install the driver designed for the visualiser and will
be used by the Capture Program.
6. After the installation is finished, then click the Exit button to exit the Software Setup
window.
7. Shut down your computer when prompted so the changes will take effect.
8. Use the USB cable to connect your computer to the visualiser before your computer is
restarted.
9. Turn on the visualiser.
Remarks: DirectX9.0 is not necessary to install, it is mainly for computer print screen function.
Please pay attention to the following:
10. Computer hardware requirement: CPU: Pentium 4, RAM: 256M or above, USB 2.0 port,
Hard disk 40G or more.
11. Operating system: Windows 2000 or above. If the operating system is Windows 2000,
should install SP4. If the operating system is Windows XP, should install SP1.
12. Must use the high-speed USB cable provided together with the visualiser.
13. When connect the visualiser to a desktop computer with the high-speed USB cable
provided together with visualiser, we recommend using the USB port on the rear of the
mainframe as the USB port on the front of the computer might have interference.
14. You need to install the USB driver again when you change a computer’s
USB port. If this port has installed USB 2.0 driver, then no need to install USB driver again.
15. When you open capture program, but can not capture the image, please set the signal
input source: click “Option” “Video Crossbar”, and then set INPUT as S-Video IN.
INSTALLING VISUALISER SOFTWARE