GAMMA 5800 Els STRINGING MACHINE 2 POINT SC MOUNTING (Issue 1 - June 2006) - Manual (Page 8)

7
ASSEMBLY INSTRUCTIONS
String Clamp Installation
The post of the string clamp and tube of the
string clamp base are treated with grease to
provide protection against corrosion during
shipping. Remove any excessive grease
with a clean cloth prior to use. The post and
tube may also be cleaned with isopropyl
alcohol. After this type of thorough cleaning,
the post and tube should be treated with a
light coating of machine oil to protect the
surfaces against corrosion and to ensure
smooth operation.
Turntable and Mounting System In-
stallation
To install the turntable remove the four nuts
underneath holding the mounting bolts in
place. Align the bolts with the holes in the
turntable pin. Secure them with the included
allen wrech.
NOTE: Apply the turntable brake and it will
be easier to align the bolts and holes.