GAMMA 5800 Els STRINGING MACHINE 2 POINT SC MOUNTING (Issue 1 - June 2006) - Manual (Page 4)

3
5800 Els
Unpacking Instructions & Contents
Instructions for Unpacking and Preparing for Assembly
The stringing machine is shipped in three cartons, a large carton for the stringing machine
and accessories, a medium carton for the turntable and mounting system and a smaller
carton for the post and base legs. Please save the cartons and packing materials for
possible shipments in the future. Gamma Sports cannot be responsible for machines
that are not returned, shipped in their original, undamaged packaging. The tools you will
need to assemble the machine are provided with the machine. Due to the weight of the
tensioner unit, you may need the assistance of someone to help lift the tensioner unit out of
the carton.
Once the cartons are opened, remove all inner cartons and check to be sure that all parts
are present and accounted for.
Contents of Base & Leg Carton
(1) Lower Post
(1) Upper Post with Flange Plate
(4) Legs
(1) Locking Knob Screw
(4) M8 x 25 Flat Head Screws
(4) M8 x 30 Cap Screws
(1) M8 x 25 Cap Screws for Height Adjustment
(1) String Reel Holder (M8 Threaded Pin), (1) Knob, (10) Spacers, & (2) M8 Washers
Contents of Mounting System Carton
(1) Turntable
(2) Mounting Stands w/ Frame Hold Down
(2) String Clamp Heads
Contents of Large Master Carton (including accessory cartons packed inside)
(1) Stringer Assembly Unit w/ Tensioner Module
(1) Power Cord
(1) Foot Pedal Tensioner Switch
(1) Tool Kit (contains side cutter, bent nose pliers, needle nose pliers)
(1) Straight Stringers Awl & (1) Pathfinder Specialty Awl
(1) Tools for assembly and maintenance