GAMMA 5800 Els STRINGING MACHINE 6 POINT SC MOUNTING (Issue 3 - January 2009) - Manual (Page 8)

7
ASSEMBLY INSTRUCTIONS
String Clamp Installation
The post of the string clamp and tube of the
string clamp base are treated with grease to
provide protection against corrosion during
shipping and while in storage. Remove any
excessive grease with a clean cloth prior to
use. The post and tube may also be cleaned
with isopropyl alcohol. After this type of
thorough cleaning, the post and tube should
be treated with a light coating of machine oil
to protect the surfaces against corrosion
and to ensure smooth operation.
Turntable and Mounting System In-
stallation
To install the turntable remove the four nuts
underneath holding the mounting bolts in
place. Position the turntable over the turn-
table pin and align the bolts with the holes in
the flange. Secure them with the included
allen wrench.