GAMMA 5800 Els STRINGING MACHINE 6 POINT SC MOUNTING (Issue 3 - January 2009) - Manual (Page 4)

3
5800 Els
Unpacking Instructions & Contents
Instructions for Unpacking and Preparing for Assembly
The stringing machine is shipped in three cartons, a large master carton for the stringing
machine base with tensioner module and accessories, a medium carton for the turntable
and mounting system and a smaller carton for the floor stand post and base legs. Please
save the cartons and packing materials for possible shipments in the future.
Gamma Sports cannot be responsible for machines that are not returned, shipped in their
original, undamaged packaging. The tools you will need to assemble the machine are
provided with the machine. Due to the weight of the tensioner unit, you may need the
assistance of someone to help lift the tensioner unit out of the carton.
Once the cartons are opened, remove all inner cartons and check to be sure that all parts
are present and accounted for.
Contents of Base & Leg Carton
(1) Lower Column
(1) Upper Column with Flange Plate
(4) Legs
(1) Locking Knob Screw
(4) M8 x 25 Flat Head Screws
(4) M8 x 30 Cap Screws
(8) M8 Nuts
(6) M6 x 20 Cap Screws
(1) M8 x 25 Cap Screws for Height Adjustment
(1) String Reel Holder (M8 Threaded Pin), (1) Knob, (10) Spacers, & (2) M8 Washers
Contents of Mounting System Carton
(1) Turntable Assembly w/ String Clamp Baes and Mounting Stands w/ Frame Support
Slide, Side Supports, and Adapters
(2) String Clamp
(1) 5mm T-Handle Allen Wrench
(1) Package of Spare plastic adapters for mounting system supports (contains 16 pcs)
Contents of Large Master Carton (including accessory cartons packed inside)
(1) Stringer Assembly Unit w/ Tensioner Module
(1) Power Cord
(1) Foot Pedal Tensioner Switch
(1) Tool Kit (contains side cutter, bent nose pliers, needle nose pliers, starting clamp)
(1) Straight Stringers Awl & (1) Pathfinder Specialty Awl
(1) Tools for assembly and maintenance