GAI-Tronics XCP0500A Handset Base Kit - Manual

Pub. 43003-041A
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model XCP0500A Handset Base Kit
Field Installation Kit Instructions
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model XCP0500A Handset Base for the ICP9000 Series Desktop Console or the ICP9000 Navigator
Series MCU allows for a connection of a remote push-to-talk handset. The kit includes the following
components:
Qty Description
1 Handset Base assembly with Handset
Installation
ICP9000 Series Desktop Console
1. Plug the modular connector into the rear of the console at the H EADSET /H ANDSET jack.
2. Route the connection wire behind or under the console based upon the location of the handset base.