GAI-Tronics XSA2000A Conversion Kit - ITA2000A to ITA2000S - Manual

Pub. 43003-027B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model XSA2000A Conversion Kit
ITA2000A to ITA2000S
Field Installation Kit Instructions
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model XSA2000A Conversion Kit provides the equipment necessary to convert a standard Model
ITA2000A Tone Remote Adapter to a Model ITA2000S Scanning Tone Remote Adapter. This kit
includes the following components:
Qty Description
1 EPROM, 50086-079
1 Label, 25326-094
1 Pub. 43004-018A, ITA2000S Installation and Service Manual
Installation
Proper grounding is advised.
1. Remove the 4 screws holding the cover of the Model ITA2000A in place. Remove the cover.
2. Extract the EPROM (U2) from the PCBA. See Figure 1 for the location.