GAI-Tronics 12827-001 ICS SmartSeries PCBA Upgrade Kit - Manual

Pub. 42003-259B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
ICS SmartSeries PCBA Upgrade Kit
Model 12827-001
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12827-001 ICS SmartSeries PCBA Upgrade Kit provides the following components:
Qty Description
1 ICS SmartSeries PCBA
1 Ribbon Cable Assembly
4 Screw, 4-40
1/4-inch PHMS
1 SmartSeries label
1 Label, Upgrade Kit
Installation
Place the upgrade kit label on the power supply housing.
Refer to Pub. 42004-725L2 (indoor station), Pub. 42004-724L2 (outdoor station), or 42004-726L2
(remote amplifier station) for general information and installation procedures.
WARNING
Before performing any of the following settings and adjustments, remove all
power from the station.
WARNING
To reduce the risk of hazardous atmospheres, disconnect the equipment
from the supply circuit before making any adjustments to the amplifier’s handset level.