GAI-Tronics 12521-004 Microphone Assembly Replacement Kit for RED ALERT Emergency Telephones User Manual
Confidentiality notice, General information, Installation
![background image](https://www.manualsdir.com/files/787111/content/doc001.png)
Pub. 42003-240A
GAI-Tronics Corporation 400 E. Wyomissing Ave., Mohnton, PA 19540 USA
610-777-1374
800-492-1212 Fax: 610-796-5954
V
ISIT WWW
.
GAI
-
TRONICS
.
COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Microphone Assembly Replacement Kit
for RED ALERT™ Emergency Telephones
Model 12521-004
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12521-004 Microphone Assembly Replacement Kit is used in the 39x Series RED ALERT™
Emergency Telephones. The kit includes two gasket types, only one of which will be used, depending on
the type of telephone (flush-mount or wall-mount) being repaired. This kit includes the following
components:
Qty Description
1
Microphone assembly with wiring (See Figure 3.)
1 Microphone
shield
1
Microphone gasket (thick) for flush-mount telephone
1
Microphone gasket (thin) for wall-mount telephone
Installation
Removing the Old Microphone Assembly
1. Use a Model 233-001 Security Screwdriver (Torx T-25 security tip) to loosen and remove the front
panel security screws. Field wiring will restrict complete removal of the front panel. Note all field
wiring terminations to unit and disconnect field wiring to allow front panel to be placed on a working
surface.
2. For the wall-mount telephone, remove the PCBA to allow access to the microphone assembly.