GAI-Tronics 12118-012 I/O Termination Connection Module Kit for LE200RM - Manual

Pub. 42003-226A
GAI-Tronics Corporation 400 E. Wyomissing Ave., Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
I/O Termination Connection Module Kit
for LE200-RM
Model 12118-012
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12118-012 I/O Termination Connection Module Kit provides field wire termination for the
audio lines of the LE200-RM Rack-Mounted Line Extender. This kit includes the following components:
Qty Description
1 Line Extender I/O Termination Connection Module
1 DB25 Cable Assembly, 2.5-foot
The connection module is DIN rail mountable and is mounted in the cabinet rack where the LE200-RM
Line Extender is installed. The DB25 cable assembly connects J1 of the Connection Module to J3 on the
rear of the LE200-RM. Field wiring of outputs is made to terminal blocks TB1 through TB7 and field
wiring of inputs is made to terminal blocks TB8 and TB9.
Installation
1. Snap the I/O Connection Module to the DIN rail within 2.5 feet of the LE200-RM Line Extender.
2. Plug one end of the DB25 cable assembly into J1 of the I/O Connection Module and secure it by
tightening the DB25 connector jackscrews. See Figure 1.