GAI-Tronics 12234-100 Dual-Band Antenna Kit - Manual

Pub. 42003-220A
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Dual-Band Antenna Kit
Model 12234-100
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12234-100 Dual-Band Antenna Kit is designed to be used with a Model 10458-10x
Electronics Paging Module. This kit mounts to either a Model 234SBM Stanchion Broadcast Module or
Model 234SBA Stanchion Broadcast Assembly.
The antenna kit contains an assembly that includes a lens cover with a hole, a ground plane and an NMO
brass antenna mount. A dual-band antenna is included in the kit. The NMO brass antenna mount has 17
feet of coaxial cable and has a BNC connector attached to the end. The BNC Connector will plug directly
into the Paging Module.
This kit includes the following components:
Qty Description
1 Lens assembly with grounding plane and NMO antenna mount
1 Dual-band antenna
N OTE : The Model 12234-100 Dual-Band Antenna Kit can only be used with the Model 530-001
LED Strobe. The use with any other strobe may cause RF communication interference.