GAI-Tronics 12505-101 Replacement Door Kit Weatherproof Enclosures - Manual

Pub. 42003-219A
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Replacement Door Kit
for Weatherproof Enclosures
Model 12505-101
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12505-101 Replacement Door Kit is for use on the GAI-Tronics Model 7325-106
Weatherproof Enclosures. This kit includes the following components:
Item Qty. Description
1 1 Door Assembly with Gasket
2 2 Washer
3 2 Hinge pin, Snap-in
Installation
Unpack the material and compare parts to the list below to ensure that all parts are present.
N
OTE : A pair of needle-nose pliers required for some assembly.
1. Remove each of the two hinge pins by compressing the slotted end with a pair of needle-nose pliers
and driving it back through the hole.
2. After removing the old door from the enclosure, check the fit and clearance of the replacement door
by placing the door assembly onto the enclosure. Place the first of the two washers (item 2) beneath
the upper door hinge and over the upper enclosure hinge bosses. Place the second washer beneath the
lower enclosure hinge and over the top of the lower door hinge bosses. File the material from the
door bosses if more clearance is required. See Figure 1.