GAI-Tronics 12522-004 Speaker Assembly Replacement Kit - Manual

Pub. 42003-217A
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Speaker Assembly Replacement Kit
Model 12522-004
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12522-004 Speaker Assembly Replacement Kit is designed for use with the GAI-Tronics
Model 297 and 298 Series Telephones. It includes the following components:
Qty Description
1 Speaker assembly
1 Tie wrap
4 Flat nylon washers
4 Nylon shoulder washers
The following tools are required to install this kit:
• #2 Phillips screwdriver
• ¼-inch straight slot screwdriver
• GAI-Tronics Model 233-001 Tamper-resistant Screwdriver
• 1/4-inch hex nut driver or socket wrench
• Wire cutters
Installation
Removal of Old Speaker Assembly
1. Use a Model 233-001 Tamper-resistant Screwdriver to remove the six screws securing the front panel
assembly to the back box. Save the screws for reassembly.
2. Lift the front panel assembly approximately 6 to 8 inches away from the back box.
3. Unplug the telephone line cord from the modular block in the back box, or disconnect the telephone
line from TB1, depending on the installation.