GAI-Tronics 12562-106 S.M.A.R.T. Auxiliary Powered Emergency Telephone PCBA Replacement Kit - Manual (Page 4)

Pub. 42003-211A
M ODEL 12562-106 S.M.A.R.T. E MERGENCY T ELEPHONE PCBA R EPLACEMENT K IT Page: 4 of 4
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-211a.doc
05/05
Installing the New PCBA
1. Align the holes in the four corners of the new PCBA with the standoffs in the telephone, maintaining
proper orientation. See Figure 2.
2. Use the screws (from step 4 in the previous section) to secure the PCBA.
3. Reconnect the red (ring) and green (tip) telephone wires to the PCBA.
4. Reconnect the microphone, speaker, switches, LED indicator, external power supply connector, and
keypad cable (Model 298-103 only) to the board.
5. Use the Model 233-001 Tamper-Resistant Screwdriver to tighten six front panel screws.
Additional Emergency Phone Replacement Parts
Part No.
Description 293-
103
293-
103AL
294-
103AL
297-
103
298-
103
233-001 Model 233-001 Tamper-Resistant
Screwdriver
„ „ „ „ „
51035-005 PCBA, Keypad
„ „
28299-007 Tamperproof Screws (flush-mount models)
„ „
28229-004 1-1/8 inch Tamperproof Screws
„ „ „
51002-106 Push Button Replacement Kit
(1.5-inch, Red)
„ „ „ „ „
13507-005 Microphone Replacement Kit
„ „ „ „ „
12522-003 Speaker Replacement Kit
„ „ „ „ „