GAI-Tronics RFP7783-003 Pole Cap Assembly with Solar Panel and Antenna for Wireless Call-Box - Manual

Pub. 42003-188A
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Pole Cap Assembly Kit
Model RFP7783-003
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model RFP7783-003 Pole Cap Assembly Kit provides a platform for securing a solar panel array,
cellular antenna, and external ringer onto the top of a 4.0-inch O.D. steel pole. The assembly is designed
to seal the interior of the pole against moisture. The kit includes the following components:
Qty Description
1 Pole cap assembly with adjustable bracket
2 Water-tight hub (for solar panel and external ringer feed-through)
1 Siemens solar panel, 20 watt
Installation
Refer to Figure 1 while completing the following steps to install the Pole Cap Assembly.
Tools and Equipment Required
• Model RFP7791-001 External Ringer Kit with Stainless Steel Ringer Bracket
• Model RFP7783-002 Antenna Kit
• Integrity Loop Cable Assembly (Part No. 61504-101)
• Protractor
• Compass
• Specialized tamper-resistant Allen wrench
• 2/C AWG 20 wire, 15 feet (minimum jacket O.D. = 0.25 in.)