GAI-Tronics 12513-007 Mid-Rear Section - 351 - Manual

Pub. 42003-151
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Valox ® Enclosure Mid- and Rear Section
Replacement Kit
M
ODEL
12513-007
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information which is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
This kit is for use on the Model 351 Telephone. It includes the following components:
Qty Description
1 Weatherproof Enclosure (mid-section)
1 Weatherproof Enclosure (rear section)
Installation
Removing the Door
1. Open the enclosure door.
2. Loosen the two screws located on the upper hinge half of the mid-section. Remove the hinge and the
door.
Removing the Front Panel Assembly
1. Remove the four screws from the front panel assembly. Pull the front panel assembly approximately 6
to 8 inches away from the back enclosure.
2. Disconnect the modular telephone line cord from the printed circuit board, and completely remove the
front panel assembly.