GAI-Tronics 12504-007, 12504-008 RigCom Harness Assembly - Manual

Pub. 42003-146
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Rigcom Harness Replacement Kit
M
ODELS
12504-007
AND
12504-008
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information which is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
Model 12504-007 is used on Model MS3987 and MS3990. Model 12504-008 is for use on Model
MS3985, MS3986, and MS3988.
N OTE : Installation of this kit must be performed in a non-hazardous location, as Rigcom units are
Division 1 approved. The power to the unit must be shut down prior to removing the front cover.
This kit includes the following components:
Qty Description
1 Bracket/Harness/Switch/Connector Assembly
1 On/Off Volume Knob
1 Push-to-Call Button (for Model 12504-008 only)
12 Bolts
You will need the following tools to install this kit:
• Allen wrench set (0.050-inch for knob)
• Open-end wrench set (5/8-inch for new hex nut)
• 2 large spade screwdrivers (for Model 12504-008 only)