D-Link DES-3208 User Manual
Page 89
System Restart Setting
Out-of-Band Baud Rate, 47
Serial Port Type, 47
TCP/IP Parameters Configuration, 45
TCP/IP Settings, 45
TCP/IP TELNET protocol, 34
TELNET program, 35
Terminal emulation/ VT100, 22
Terminal emulator program
Under Windows operating system,
34
Terms used in document, v
TFTP (the Trivial File Transfer
Protocol), 47
Third-party vendors’ SNMP
software, 25
Total Bytes Rx (Total Bytes
Received), 56
Total Frames Rx (Total Frames
Received), 56
Transceiver
100BASE-FX or TX, 13
Transceiver address setting, 13
Transmission Methods, 69
Trap Type
Authentication Failure, 24
Cold Start, 23
Link Change Event, 24
New Root, 24
Port Partition, 24
Topology Change, 24
Traps, 23
Traps, definition of, 23
Tx (Good) (Frames Sent), 56
Unpacking, 6
Unpacking and Setup, 6–10
User-Changeblel Parameters
Bridge Forward Delay, 30
Bridge Hello Time, 29
Bridge Max Age, 29
Bridge Priority, 29
Port Priority, 30
User-Changeblel Parameters, 29
Using the Console Interface, 34–66
ventilation, 7
VT100-compatible terminal, 34
Weight, 69