Hub without uplink (mdi-ii) port, 10base-t hub, 100base-tx hub – D-Link DES-3208 User Manual

Page 31

Text mode
Original mode

10/100 Fast Ethernet Switch User’s Guide

Connecting The Switch

10Base-T Hub

For a 10 Base-T hub, the Switch’s LED indicators should illuminate the
following:

♦

100M LED speed indicator is OFF.

♦

Link/Act indicator is ON.

♦

FDX/Col indicator is OFF.

100Base-TX Hub

For a 100Base-TX hub, the Switch’s LED indicators should illuminate the
following:

♦

100M LED speed indicator is ON.

♦

Link/Act is ON.

♦

FDX/Col LED indicator is OFF.

Hub without Uplink (MDI-II) port

If a hub is not equipped with an uplink (MDI-II) port, then connection can
be made using either straight cable or crossover cable (see Appendix A,
Technical Specifications for cable requirements).