Setting up the switch, Tcp/ip settings – D-Link DES-3208 User Manual

Page 56

Text mode
Original mode

10/100 Fast Ethernet Switch User’s Guide

Using the Console Interface

Figure 6-9. Deleting a User

Choose SAVE and press Enter to let the user addition take effect.

Choose EXIT to leave the Delete Users menu.

Setting up the Switch

This section describes the settings you will need to change to allow you to be
able to manage the Switch from an SNMP-based Network Management
System such as D-View, SNMP-View, or to be able to access the Switch
using the TELNET protocol.

TCP/IP Settings

The Switch needs to have a TCP/IP address assigned to it so that the network
management system or TELNET client can find it on the network. The
TCP/IP Parameters Configuration menu allows you to change the settings
for the two different interfaces used on the Switch: the Ethernet interface