GAI-Tronics 12567-001 Page Button Replacement Kit for Mine Phone - Manual (Page 2)

Pub. 42003-084A
M ODEL 12567-001 P USH B UTTON R EPLACEMENT K IT Page: 2 of 2
f:\standard ioms - current release\42003 kit manuals\42003-084a.doc
04/10
4. See Figure 1 for proper wiring and switch block orientation. Connect the wires removed from the old
switch to the new switch blocks.
5. Connect the jumper wires as noted in Figure 1.
6. Tighten the screws to secure the wires firmly to the switch blocks.
7. Attach the switch blocks by snapping them onto the switch-mounting adapter. Pay careful attention
to the proper placement of each switch block per Figure 1.
8. Close the unit.
44-
1
31
ea
o
e
s
a
.2 .4
.1
.3
.3 .1
.4 .2
(T
E
X
T
S
IDE
)
Figure 1.