GAI-Tronics 12565-001 Replacement Kit for 69701-101 (701-10x to 701-20x) - Manual

Pub. 42003-079C
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Printed Circuit Board Assembly
Replacement Kit
M
ODEL
12565-001
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may not
be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
This kit is used on the Model 701-10x Amplifiers. Installation of this kit will upgrade your Model 701-10x
Amplifier to a Model 701-20x Amplifier. In the future, you may replace the handset receiver, the handset
printed circuit board (Model 12550-001), and the speaker amplifier printed circuit board (Model
69701-007) separately. This kit is a one-time purchase only. This kit includes the following components:
Qty Description
1 Handset Receiver
1 Handset Printed Circuit Board
1 Handset Speaker Amplifier Printed Circuit Board
1 Label
Installation
Removal of Old Receiver
1. Unscrew the microphone cap, and remove the microphone assembly.
2. Remove the screw securing the black wires. One black wire goes to the handset cord; the other wire
connects the microphone and the receiver. This kit requires the removal of the black wire connecting the
microphone and receiver. Using the original screw, reconnect the black handset wire to the microphone.
3. Unscrew the receiver cap.
4. Remove the receiver assembly from the handset.