GAI-Tronics 12536-001, 12536-002 Trim Frame Kit - Manual (Page 3)

Pub. 42003-054B
M ODEL 12536-001 AND 12536-002 S INGLE AND M ULTI -P ARTY T RIM F RAME K ITS Page: 3 of 3
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-054b.doc
5/95
13. Plug in the amplifier. Align the holes in the trim frame. Tighten the amplifier screws. Tighten the
four upper screws.
14. To install the new knob, place the knob on the switch shaft, and secure it using the Allen set screws.
Tighten the screw at the tail end of the switch first. Note that the knob tail is aligned with the flat of
the switch. See Figure 1.
Figure 1. Knob Installation