GAI-Tronics 12519-001 Mechanical Cradle Assembly - Manual

Pub. 42003-034B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Mechanical Cradle Assembly
Replacement Kit
M
ODEL
12519-001
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may not
be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 12519-001 Mechanical Cradle Assembly Replacement Kit can be used on the following
equipment.
Page/Party ® Centra-Page Electro-Sound
Hazardous Area Stations Subsets Stations Stations
780-001 611C 472-002 473-001
7805-001 6115 473-002 472-001
780-002 616C
7805-002 6165
This kit may also be used on obsolete Model 601E, 601D, and 701A stations.
This kit includes the following components:
Qty Description
1 Handset Cradle
1 Hookswitch Hinge
1 7/16-20 hex nut (hazardous area stations only)
1 15/32-32 hex nut (not used on hazardous area stations)
1 Hinge Pin
1 Washer
You will need the following tools to install this kit:
• 5/8-inch 12-point Socket Wrench
• Small Pin Punch (approximately 3/32-inch)
• Small Hammer