GAI-Tronics 12513-003 Repl. Hinge Kit Interior Plugs - Manual (Page 2)

Pub. 42003-031A
M ODEL 12513-003 I NTERIOR H INGE P LUG R EPLACEMENT K IT Page: 2 of 2
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-031a.doc
1989
4. If an anchored hinge requires removal but is still secured to the mid- or front section, it is necessary to
pull it out with needle-nose pliers. Depending on how the hinge malfunctioned, it may be
advantageous to punch it in first, and then remove it.
5. If the entire hinge requires replacement, first remove the entire old hinge. Snap the 2 sections of the
new hinge together. Place the enclosure section of the hinge (the larger section) in the enclosure hole
and, if desired, secure it with glue.
6. Align the mid- or front section (depending on the model) with the rear section, and snap it into place.
7. Model 280 and 283 only: Reconnect the printed circuit board connections.
All models: Swing the mid-section flush with the rear section, and secure it with the 4 screws
fastened in the corners of the mid-section.