GAI-Tronics 12513-002 Enc. Mid/rear section Valox - Manual

Pub. 42003-025C
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Valox ® Enclosure Mid/Rear Section Kit
Model 12513-002
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
This kit services the following models: Model 256-001, 256-001SK, 257-001, and 272-001. This kit
includes the following components:
Qty Description
1 Weatherproof Enclosure (mid-section)
1 Weatherproof Enclosure (rear section)
4 Screw
Removing the Front Panel Assembly
1. Remove the four screws from the front panel assembly. Pull the front panel assembly approximately
6 to 8 inches away from the back enclosure.
2. Disconnect the modular telephone line cord from the PCBA, and completely remove the front panel
assembly.
Removing the Door
1. Open the enclosure door.
2. Loosen the two screws to the upper hinge half on the mid-section, and remove the hinge and door.