GAI-Tronics 12504-004 Repl. Door Handle Kit - Manual

Pub. 42003-011B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Door Handle Replacement Kit
M
ODEL
12504-004
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
This kit provides the repair procedure for the following weatherproof enclosure models:
• 473-001 • 7335-002 • 733-001 • 10444-003 • 7335-004
• 733-002 • 473-002 • 7335-001 • 733-006 • 7335-006
This kit includes the following components:
Qty Description Item Number
1 Handle 1
1 Handle shaft, stainless steel 2
1 Flat washer, stainless steel, 0.281 I.D.
× 0.500 O.D. × 0.063 thick (inches)
3
1 Torsion spring, stainless steel 4
1 Roll pin, stainless steel (0.125-inch dia.
× 1.00-inch long)
5
1 O-ring 6
Installation
Removing the Old Handle
1. Knock the existing roll pin entirely out of the handle and the handle shaft.
2. Remove the handle from the shaft. Unhook the torsion spring from the retaining boss on the inside of
the door. Remove the shaft, the spring, and the flat washer from the door, and discard all the pieces
removed from the door.