GAI-Tronics IPE2500A, IPE2500A-MLS Paging Encoder / Desktop Controller User and Installatoin Manual - Manual (Page 66)

CARD Suite Programming IPE2500A & IPE2500A-MLS Paging Encoder/Desktop Controller
03/12 60
CARD Suite Programming
To program a unit that has no saved archive, follow the steps for Reading the Unit on the previous page.
To open an existing archive for editing, first click on the appropriate product icon, then double click on
the archive you wish to edit from the list of saved archives. This will open the archive for that particular
unit.
After all changes are made, you must save and close the archive prior to programming the unit with
changes by clicking the OK button at the bottom of the screen.
After saving and closing the archive you can program the unit by selecting the archive from the list of
saved archives, then selecting Program Unit under the Tools dropdown.
Editing Screen
The status bar on the bottom of the window gives instructions on setting the desired parameter. Editing
some parameters depends on the state of another parameter, such as in the Programmable Buttons screen.
After changing a parameter, appropriate changes are automatically made to any other parameter on the
screen that depends on it.