GAI-Tronics 7085-005-UL, 7085-005-EX SmartSeries Multi-Party Hazardous Area Handset/Speaker Amplifier Enclosure w/ RTU Control - Manual (Page 14)

Pub. 42004-697L2B
Model 7085-005-UL/EX SmartSeries Multi-Party Haz. Area Amp. Enclosure with RTU Page 14 of 15
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-697l2b.doc
11/07
Specifications
Construction/finish................................................................................. Cast aluminum/gray polyurethane
Mounting............................................................... Wall or column, four 1/2-inch mounting feet with slots
Connections ...............................................................................Internal screw-type barrier terminal blocks
Dimensions........................................ 15.25 H
× 15.25 W × 12.375 D inches (387.4 × 387.4 × 314.3 mm)
Temperature range (operating and storage)
Model 7085-005-UL ...................................................................... (-4º F to +151º F) -20º C to +66º C
Model 7085-005-EX ....................................................................... (-4º F to +140º F) -20º C to +60º C
Shipping weight ............................................................................................................. 75 lbs. (34.02 kg)
Enclosure............................................................................................................................ IP66/Type 4X
Approvals
Model 7085-005-UL
NRTL listed........................................................ Hazardous locations Class I, Div. 1, Groups B, C, D;
(USA and Canada)
Class II, Div. 1, Groups F, G;
Class III, Div. 1
T6, Type 4X
Model 7085-005-EX
CE Mark...................................................... Complies with Low Voltage Directive 73/23/EEC, and the
EMC Directive 89/336/EEC amended by the Directive 93/68/EEC.
Certificate No. DEMKO 05 ATEX 0526157X
Notified Body Id No. 0539
UL International DEMKO A/S
Lyskear 8
DK-2730 Herlev
Denmark
ATEX Certified ..........................................................................................ll 2 G Ex d [ib] IIB + H
2
T6
Applicable standards .................................................... EN 50014:1997, A1+A2:1999, EN50020:2002,
EN 60079-0:2006 and EN 60079-1:2004