GAI-Tronics 7085-004-UL, 7085-004-EX SmartSeries Multi-Party Hazardous Area Handset/Speaker Amplifier Enclosure w/ Alternate Page User Manual
Page 12

Pub. 42004-694L2B
Model 7085-004-UL/EX SmartSeries Multi-Party Haz. Area Amplifier Enclosures
Page:
12 of 12
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-694l2b.doc
11/07
Replacement Parts
Model No. Description
10108-011
UL Listed Handset Assembly with 6-foot PVC Cord (with cable gland)
10108-012
ATEX Certified Handset Assembly with 6-foot PVC Cord (with cable gland)
13205-006
Receiver, Handset 150-ohm
61504-111
Reed Switch Assembly with plug and spacer
61504-112
Push-Button Cable Assembly
12511-001
Dynamic Transmitter and cap
13204-002 Receiver
Cap
61512-030
Party Line Selector Switch with plug cable assembly
N
OTE
: The replacement equipment must be installed by trained, qualified and competent personnel.
Installation must comply with state and national regulations, as well as safety practices for this type of
equipment.
- 7085-004-EX-F07049 SmartSeries Multi-Party Hazardous Area Amplifier Enclosure with Alternate Page 7085-001-UL, 7085-001-EX SmartSeries Multi-Party Hazardous Area Handset/Speaker Amplifier Enclosure 708-001-UL, 708-001-EX SmartSeries Single Party Hazardous Area Handset/Speaker Amplifier Enclosure 708-001-EX-F07048 SmartSeries Single Party Hazardous Area Amplifier Enclosure 707-001-UL, 707-001-EX SmartSeries Hazardous Area Speaker Amplifier Enclosure 7085-005-UL, 7085-005-EX SmartSeries Multi-Party Hazardous Area Handset/Speaker Amplifier Enclosure w/ RTU Control 7085-001-EX-F07044 SmartSeries Multi-Party Hazardous Area Amplifier Enclosure 707-001-EX-F07045 SmartSeries Hazardous Area Speaker Amplifier Enclosure