GAI-Tronics 393-001AD, RED ALERT Auto-dial Telephones - Manual (Page 12)

P UB . 42004-472B
A UTO -D IAL T ELEPHONE M ANUAL P AGE
10 of 33
f:\standard ioms - current release\42004 instr. manuals\42004-472b.doc
01/15
Model 397-00 x AD
Stanchion or Flush-Mount Applications
2. When mounting in a GAI-Tronics Model 234 Series Stanchion, or for flush-mount installations, the
supplied back box must be used. Mount the back box to the structure using appropriate hardware.
Refer to Figure 9 cutout dimensions.
N
OTE : If mounted outdoors, the installation of a telephone line suppressor (customer-supplied) on the
telephone line is recommended.
Figure 8. Model 397-00xAD
3. Remove the tapered plug from either of the cable entry holes in the back box, and install the
telephone line and cable fitting.
N
OTE : Telephone line connections directly to TB1 are acceptable.
4. If using the modular jack, remove the cover, and connect the telephone line’s tip (+) wire to the green
wire on the modular jack, and the ring (−) wire to the red wire on the modular jack. Replace the
modular jack cover.