GAI-Tronics 210-001 Corridor Telephone - Manual (Page 3)

Pub. 42004-449B
Model 210-001 Corridor Telephone Page: 3 of 9
f:\standard ioms - current release\42004 instr. manuals\42004-449b.doc
06/11
3. Two 1-inch entry holes are provided on the mounting panel for cable entry.
4. Connect the modular telephone cord, or direct subscriber telephone line, to the PCBA terminal strip.
Figure 3. Telephone Cord Connection to PCBA Terminal Strip
5. Connect the free end of the modular telephone cord to the incoming subscriber line using the
appropriate mating connector (if utilized).
6. Replace the front cover assembly and tighten the four front cover screws.
7. Check the telephone operation by calling to and from another telephone.
Figure 4. Model 210-001 Outline Drawing