GAI-Tronics 226-700 Hanset VoIP Telephones with Keypad - Manual (Page 9)

Pub. 42004-445H
V O IP I NDUSTRIAL H ANDSET T ELEPHONES P AGE 7 of 24
f:\standard ioms - current release\42004 instr. manuals\42004-445h.doc
02/15
6. Pull the Ethernet cable through the conduit and install the cable as shown in the “Field Wiring
Installation” section on page 14.
7. Connect any desired peripheral devices. Refer to page 16 for connection information. Seal the
conduit entry point(s).
8. Perform the initial programming of the telephone. Refer to the “Programming” section beginning on
page 19.
9. Verify operation by calling to and from another telephone. Verify operation of peripheral equipment.
Figure 5. Model 226-700 Mounting Details
10. Replace the front panel assembly, and secure using the eight front panel security screws (10–12 in-
lbs. of torque recommended).