GAI-Tronics ICS Page/Party Desk-edge Subset - Manual (Page 2)

Pub. 42004-428B
ICS Page/Party
®
Desk-Edge Subset Page 2 of 4
e:\standard ioms - current release\42004 instr. manuals\42004-428b.doc
11/13
Features and Functions
 Provides one-way page announcements over system speakers
 Provides full-duplex party line communication
 Durable, high visibility safety orange powder coat finish
Options
Installation
WARNING
Do not install this equipment in hazardous areas.
Such installations may cause a safety hazard and
consequent injury or property damage.
1. Refer to Figure 2 for the desk-edge mounting
bracket hole locations and sizes.
2. Secure the bracket to a vertical surface using
two #8 screws in the 0.20-inch (5.1mm) holes
on the side of the mounting bracket. Refer to
Figure 3 for a typical installation.
3. Attach the subset to the mounting bracket with
the two #10-32 screws and washers provided.
To do this, align the two threaded holes on the
bottom of the subset with the through-holes on
the mounting bracket.
4. Plug the interconnect cable into the subset and
the remote amplifier. Secure the interconnect
cable thumbscrews to assure the plug does not
disconnect.
 Single party line operation
 PVC or Hytrel
® handset cords in 6-, 15-, or 25-foot lengths
 Conformal coating for PCBA
Figure 2. ICS Desk-Edge Subset
Outline View