GAI-Tronics 4115A Surface-Mount Beacon Mounting Bracket Assembly - Manual

Pub. 42004-272B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 4115A Surface-Mount
Strobe Mounting Bracket Assembly
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 4115A Surface-Mount Strobe Mounting Bracket Assembly includes the following
components:
Qty Description Figure Item #
1 Cover, aluminum oval 1
1 Conduit pipe, galvanized 2
1 Elbow, aluminum 3
1 Gasket for oval cover 4
1 Wall-mounting bracket, aluminum 5
2 Screws, stainless steel 6
1 Lock nut 7
Installation
Refer to Figure 1 on page 2 for the location of the items with numbers.
1. Secure the wall-mounting bracket (Item 5) to the wall.
N OTE : Mounting hardware is not included.
2. Thread the lock nut (Item 7) onto the elbow end of the conduit pipe (Item 2).
3. Thread the ¾-inch female end of the elbow (Item 3) into the conduit pipe.
4. Thread the other end of the conduit pipe into the wall-mounting bracket.