GAI-Tronics 10401-201 Headset - Manual

Pub. 42004-212C
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 10401-201 and
10401-301 Headsets
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The GAI-Tronics Model 10401-201 Headset provides hands-free communication with Page/Party ®
systems. The 30-foot extension cable provides mobility when connected to a Page/Party ® station. The
cable is equipped with a push-to-page switch on the belt clip so users can access the page line up to
30 feet away from a Page/Party
® station.
The GAI-Tronics Model 10401-301 Mobile Headset provides hands-free communication with GAI-
Tronics’ Digital Intercom System. The Model 10416-301 30-Foot Extension Cable provides mobility
when connected to a digital intercom station.
Both headsets provide a noise reduction rating of 23 dB, making them ideal for use where hearing
protection is required. Please refer to the attached Environmental Protection Agency (EPA) Use and
Care Sheet for information on maintaining the headsets’ noise reduction rating (NRR). The gooseneck
(flex-boom) microphone is fully adjustable but remains stationary once in place. In addition, the gel-
filled ear cups and adjustable black cloth head strap maximize comfort and keep the headset securely in
place. These headsets are designed for use in areas with up to 110 dB SPL ambient noise, improving
safety for employees working in these areas.
The Model 10401-201 Headset and 10401-301 Mobile Headset are adaptable for use with or without
hard hats. An employee working in different areas with different requirements can alternate the use of
the same headset, requiring a reduced investment. A headset clip is provided to prevent the coil cord
from dangling when it is not connected to the extension cable.
Operation
The Model 10401-201 Headset must be connected to a Page/Party ® station using a Model 10416-103
Extension Cable. The connection of the headset disables the Page/Party ® station handset and paging can
only be initiated from the headset. To page from the headset, press the push-to-page switch located on
the extension cable belt clip.