Installation, 84504-201 hardware kit installation – GAI-Tronics 234 Stanchion Assembly User Manual
Page 3

Pub. 42004-194M
234 Stanchion Assembly and Model 234SBA Stanchion Broadcast Assembly
Page 3 of 11
f:\standard ioms - current release\42004 instr. manuals\42004-194m.doc
11/12
Installation
ATTENTION
Installation should be performed by qualified personnel and only in
accordance with the National Electrical Code and applicable local codes.
The following information provides guidelines on the installation of various components of the
emergency station. Grounding electrode conductor (not depicted in the illustration) must be constructed
in accordance with the National Electrical Code and applicable local codes.
Model 84504-201 Hardware Kit Installation
The Model 84504-201 Hardware Kit includes four anchor bolts, which should be installed so that they
extend 3 inches above the top of the pier surface. See Figure 3.
Figure 3. Front View