D-Link DI-634M - Manual (Page 76)

76
DI-634M User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 3: Create a new firewall rule:
Click
Enabled. Enter a name (edonkey). Click Allow. Next to Source, select WAN
under interface. In the first box, enter an *. Leave the second box empty. Next to
Destination, select LAN under interface. Enter the IP Address of the computer you are
running eDonkey from. Leave the second box empty. Under Protocol, select *. In the
port range boxes, enter 4661 in the first box and then 4665 in the second box. Click
Always or set a schedule.
Step 4: Click Apply and then Continue.